Poulan Pro Poulan Pro FL20C Chainsaw Manual

The Poulan Pro FL20C is a powerful chainsaw designed for homeowners and professionals alike. It features a 20-inch bar, a robust engine, and a lightweight design for easy handling. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key features include a powerful 42cc engine, automatic oiling system, and a tool-less chain tensioning system for convenience.

Feature	Description
Engine	42cc, 2-cycle engine for efficient cutting
Bar Length	20 inches for extended reach
Weight	Lightweight design for easy maneuverability
Oiling System	Automatic oiling for chain lubrication
Chain Tensioning	Tool-less adjustment for quick setup

Safety Information

Always wear appropriate safety gear, including gloves, goggles, and hearing protection. Ensure the area is clear of obstacles before operating the chainsaw.

Read the manual thoroughly before use.
Keep hands and feet away from the cutting area.
Never operate in wet conditions.

WARNING! Failure to follow safety precautions can result in serious injury.

Operation Instructions

To start the chainsaw, ensure the chain brake is engaged, then follow the starting procedure outlined in the manual.

Check fuel and oil levels.
Engage the chain brake.
Pull the starter cord to start the engine.
Disengage the chain brake before cutting.

CAUTION! Always maintain a firm grip and proper stance while operating.

Specifications

Engine Type: 2-cycle, 42cc.
Bar Length: 20 inches.
Weight: Approximately 10 lbs.
Fuel Capacity: 16 oz.
Oil Capacity: 8 oz.
Chain Speed: 15 m/s.
Noise Level: 110 dB(A).

Maintenance

Regular maintenance is crucial for optimal performance. Clean the air filter, check the spark plug, and ensure the chain is properly lubricated.

Inspect the chain tension before each use.
Sharpen the chain regularly for efficient cutting.
Store in a dry place when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Fuel issues	Check fuel level and quality; ensure choke is set correctly.
Chain not moving	Chain tension	Adjust chain tension; check for obstructions.
Excessive vibration	Worn chain	Inspect and replace chain if necessary.
Oil leaking	Damaged oil tank	Inspect for cracks; replace if needed.

Service: For further assistance, contact customer support.