Poulan Pro PRO 305 Chainsaw Manual

The Poulan Pro PRO 305 is a powerful chainsaw designed for both professional and home use. It features a 30cc engine, a 16-inch bar, and a lightweight design for easy maneuverability. This manual covers important safety information, features, operation instructions, maintenance tips, and troubleshooting guidelines.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

The Poulan Pro PRO 305 chainsaw includes several key features:

30cc 2-cycle engine for efficient cutting power.
16-inch guide bar for optimal cutting length.
Automatic oiling system for chain lubrication.
Lightweight design for reduced operator fatigue.
Easy start system for quick ignition.

Safety Information

Always prioritize safety when operating the chainsaw:

Wear appropriate personal protective equipment (PPE).
Keep bystanders at a safe distance.
Inspect the chainsaw before use for any damage.
Never operate the chainsaw in wet conditions.

WARNING! Failure to follow safety instructions may result in serious injury or death.

Operation Instructions

To operate the Poulan Pro PRO 305 chainsaw:

Ensure the chainsaw is properly assembled and fueled.
Start the chainsaw following the manufacturer's instructions.
Hold the chainsaw firmly with both hands.
Begin cutting at a steady pace, allowing the chainsaw to do the work.

CAUTION! Always be aware of your surroundings while operating the chainsaw.

Specifications

Engine Type: 30cc 2-cycle.
Bar Length: 16 inches.
Weight: Approximately 10 lbs.
Fuel Capacity: 12 oz.
Oil Capacity: 6 oz.
Chain Speed: 20 ft/s.
Sound Level: 110 dB(A).

Maintenance

Regular maintenance is essential for optimal performance:

Clean the air filter regularly.
Check and adjust the chain tension.
Sharpen the chain as needed.
Inspect the spark plug and replace if necessary.

NOTE: Always refer to the manual for detailed maintenance procedures.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Fuel issue	Check fuel level and quality; ensure proper mixture.
Chain not moving	Chain tension	Adjust chain tension; check for obstructions.
Excessive vibration	Loose parts	Tighten all screws and bolts; inspect for damage.
Oil leaking	Seal damage	Inspect seals and replace if necessary.

Service: For further assistance, contact customer support.