Poulan Pro PR3816 Chainsaw Manual

The Poulan Pro PR3816 is a powerful chainsaw designed for homeowners and professionals alike. It features a 38cc 2-cycle engine, a 16-inch bar and chain, and an automatic oiling system for smooth operation. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key features include a lightweight design, easy start system, and a chain brake for added safety.

Feature	Description
38cc Engine	Powerful engine for efficient cutting
16-inch Bar	Ideal length for various cutting tasks
Automatic Oiling	Keeps the chain lubricated for optimal performance
Chain Brake	Stops the chain quickly for safety
Lightweight Design	Easy to handle and maneuver

Safety Information

Always wear protective gear, including gloves, goggles, and hearing protection. Ensure a clear work area and be aware of your surroundings.

Read the manual before use.
Keep bystanders at a safe distance.
Inspect the chainsaw before each use.
Do not operate in wet conditions.

WARNING! Failure to follow safety instructions may result in serious injury.

Operation Instructions

To operate the chainsaw, follow these steps:

Ensure the chainsaw is properly assembled.
Fill the fuel tank with a 50:1 gas/oil mixture.
Prime the bulb and set the choke.
Pull the starter cord to start the engine.
Use the throttle to control the speed.

CAUTION! Always keep hands and feet away from the chain while operating.

Specifications

Engine Type: 38cc 2-cycle
Bar Length: 16 inches
Weight: 10 lbs
Fuel Capacity: 12 oz
Oil Capacity: 6 oz
Chain Speed: 15 m/s

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

Clean the air filter regularly.
Check and adjust the chain tension.
Sharpen the chain as needed.
Inspect the spark plug and replace if necessary.

Tip: Always refer to the manual for detailed maintenance instructions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Fuel issue	Check fuel level and mixture; ensure choke is set correctly.
Chain not moving	Chain tension	Adjust the chain tension; check for obstructions.
Excessive vibration	Loose parts	Tighten all screws and bolts; inspect for damage.
Engine overheating	Lack of lubrication	Check oil level; ensure automatic oiling system is functioning.

Service: For further assistance, contact customer support.