Poulan Pro PATRIOT EL-16 Chainsaw Manual

The Poulan Pro PATRIOT EL-16 is a powerful electric chainsaw designed for efficient cutting and trimming. With a 16-inch bar and chain, this chainsaw is perfect for homeowners and professionals alike. It features a lightweight design for easy maneuverability, a tool-less chain tensioning system for quick adjustments, and an automatic oiling system to keep the chain lubricated during use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 16-inch bar, automatic oiling system, tool-less chain tensioning, lightweight design, safety switch, and ergonomic handle.

Installation

Unpack the chainsaw and inspect for any damage. Ensure all components are included.

1. Attach the bar and chain according to the instructions in the manual.
2. Fill the oil reservoir with bar and chain oil.
3. Ensure the power cord is in good condition and properly connected.
4. Check the tension of the chain before use.

WARNING! Always wear appropriate safety gear when operating the chainsaw.

First-Time Setup

Before operating the chainsaw for the first time, ensure it is properly assembled and lubricated.

1. Read the user manual thoroughly to understand all features and safety precautions.
2. Adjust the chain tension as needed for optimal performance.
3. Test the safety switch to ensure it is functioning correctly.
4. Perform a dry run to familiarize yourself with the controls.

CAUTION! Ensure the area is clear of obstacles before starting the chainsaw.

Specifications

• Bar Length: 16 inches.
• Power Source: Electric.
• Weight: Lightweight design for easy handling.
• Chain Type: Low kickback chain for safety.
• Oiling System: Automatic oiling for continuous lubrication.
• Voltage: 120V.
• Amperage: 12A.

Controls and Settings

Access the controls located on the handle for easy operation. Key controls include the power switch, safety switch, and chain tension adjustment.

Power Switch: Turns the chainsaw on and off.

Safety Switch: Must be engaged to operate the chainsaw.

Chain Tension Adjustment: Tool-less adjustment for optimal chain performance.

Connecting Devices

Ensure the chainsaw is unplugged before making any connections.

1. Connect the power cord to a grounded outlet.
2. Check for any frayed wires or damage before use.
3. Ensure the extension cord is rated for outdoor use if needed.

Tip: Always use a heavy-duty extension cord for optimal performance.

Operating the Chainsaw

Follow these steps for safe and effective operation of the chainsaw.

1. Ensure the area is clear of people and obstacles.
2. Engage the safety switch and press the power button to start.
3. Hold the chainsaw firmly with both hands while cutting.
4. Maintain a steady pace and avoid forcing the chainsaw.
5. Release the power button to stop the chainsaw.

WARNING! Always keep hands and body away from the cutting area.

Maintenance

Regular maintenance is essential for optimal performance and longevity of the chainsaw.

1. Clean the chainsaw after each use to remove debris.
2. Check and refill the oil reservoir regularly.
3. Inspect the chain for wear and replace if necessary.
4. Store the chainsaw in a dry place when not in use.

CAUTION! Always unplug the chainsaw before performing maintenance.

Safety Information

Read all safety instructions before operating the chainsaw.

• Always wear safety goggles and gloves.
• Keep bystanders at a safe distance.
• Do not operate in wet conditions.
• Be aware of your surroundings and avoid overhead hazards.

Regulatory Information

This chainsaw complies with all applicable safety standards. For support, visit www.poulanpro.com or contact customer service.

Troubleshooting

Reset: Unplug and re-plug to reset the chainsaw.

Service: For assistance, contact customer service at 1-800-554-6723.