Poulan Pro 966063001 Chainsaw Manual

The Poulan Pro 966063001 is a powerful chainsaw designed for both professional and home use. It features a 50cc engine, a 20-inch bar, and a lightweight design for easy handling. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key features include a powerful 50cc engine, a 20-inch cutting bar, automatic oiling system, and an ergonomic handle for comfort during extended use.

Feature	Description
Engine	50cc, 2-stroke engine for high performance
Bar Length	20 inches for cutting larger logs
Weight	Lightweight design for easy maneuverability
Oiling System	Automatic oiling for continuous lubrication
Handle	Ergonomic handle for comfort and control

Safety Information

Always wear appropriate safety gear, including gloves, goggles, and hearing protection. Ensure the area is clear of bystanders before operating the chainsaw.

Read the manual thoroughly before use.
Inspect the chainsaw for damage before each use.
Keep hands and feet away from the cutting area.
Never operate in wet conditions.

WARNING! Failure to follow safety instructions may result in serious injury.

Operation Instructions

To start the chainsaw, ensure the chain brake is engaged, pull the choke out, and then pull the starter rope until the engine fires. Once started, push the choke back in and disengage the chain brake.

Check fuel and oil levels before starting.
Engage the chain brake before starting the engine.
Use both hands to operate the chainsaw.
Maintain a firm grip and proper stance while cutting.

CAUTION! Always be aware of your surroundings while operating.

Specifications

Engine Type: 50cc, 2-stroke
Bar Length: 20 inches
Weight: 11 lbs
Fuel Capacity: 16 oz
Oil Capacity: 8 oz
Chain Speed: 20 m/s
Noise Level: 115 dB

Maintenance

Regular maintenance is crucial for optimal performance. Clean the air filter, check the spark plug, and ensure the chain is properly tensioned.

Clean the air filter every 10 hours of use.
Check the spark plug for wear and replace if necessary.
Lubricate the chain regularly to prevent wear.
Store the chainsaw in a dry place when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Fuel issues	Check fuel level and quality; ensure choke is set correctly.
Chain not moving	Chain tension	Adjust chain tension; check for obstructions.
Excessive vibration	Worn parts	Inspect for worn or damaged components; replace as needed.
Smoke from engine	Oil issues	Check oil level; ensure correct oil type is used.

Reset: Refer to the manual for reset procedures if applicable.