Poulan Pro 952802111 Chainsaw Manual

The Poulan Pro 952802111 is a powerful chainsaw designed for both professional and home use. It features a 20-inch bar and chain, a robust 50cc engine, and is equipped with advanced safety features such as a chain brake and low kickback chain. This manual provides essential information on safety, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key features include: 50cc engine, 20-inch bar, automatic oiling system, and ergonomic handle for comfort during use.

Feature	Description
Engine	Powerful 50cc engine for efficient cutting
Bar Length	20-inch bar for larger cutting tasks
Chain Brake	Automatic chain brake for enhanced safety
Oiling System	Automatic oiling system for chain lubrication
Weight	Lightweight design for ease of handling

Safety Information

Always wear protective gear, including gloves, goggles, and hearing protection. Ensure the area is clear of obstacles before operating the chainsaw.

Read the manual thoroughly before use.
Check for any damage before operation.
Keep hands and feet away from the cutting area.
Never operate in wet conditions.

WARNING! Failure to follow safety instructions may result in serious injury.

Operation Instructions

To start the chainsaw, ensure the chain brake is engaged, prime the bulb, and pull the starter cord. Release the chain brake before cutting.

Engage the chain brake before starting.
Prime the fuel bulb.
Pull the starter cord to start the engine.
Release the chain brake to begin cutting.

CAUTION! Always maintain a firm grip and proper stance while operating.

Specifications

Engine Displacement: 50cc.
Bar Length: 20 inches.
Weight: 12 lbs.
Fuel Type: Gasoline.
Oil Type: Bar and chain oil.
Chain Speed: 15 m/s.
Noise Level: 110 dB.

Maintenance

Regular maintenance is essential for optimal performance. Clean the air filter, check the spark plug, and ensure the chain is properly tensioned.

Clean the air filter every 10 hours of use.
Check and replace the spark plug as needed.
Sharpen the chain regularly for efficient cutting.
Inspect the bar for wear and replace if necessary.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Fuel issue	Check fuel level and quality; ensure proper priming.
Chain not moving	Chain tension	Adjust chain tension; check for obstructions.
Excessive vibration	Worn parts	Inspect and replace worn components.
Engine overheating	Lack of lubrication	Check oil level; ensure proper oiling system function.

Service: For further assistance, contact customer support.