Poulan Pro 545137246 Chainsaw Manual

The Poulan Pro 545137246 is a powerful chainsaw designed for both professional and home use. It features a 50cc engine, a 20-inch bar, and is equipped with advanced safety features including a chain brake and low kickback chain. This manual provides essential information on safety, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key features include: 50cc engine, 20-inch bar, automatic oiling system, and ergonomic handle design for comfort during use.

Feature	Description
Engine	Powerful 50cc engine for efficient cutting
Bar Length	20-inch bar for larger cutting tasks
Chain Brake	Automatic chain brake for enhanced safety
Oiling System	Automatic oiling system for chain lubrication
Weight	Lightweight design for easy handling

Safety Information

Always wear appropriate safety gear including gloves, goggles, and hearing protection. Ensure the chainsaw is in good working condition before use.

Read the manual thoroughly before operating.
Keep bystanders at a safe distance while operating.
Never operate the chainsaw in wet conditions.
Inspect the chainsaw for damage before each use.

Operation Instructions

To operate the chainsaw, follow these steps:

Check fuel and oil levels before starting.
Start the chainsaw on a flat surface.
Engage the chain brake before starting.
Use the throttle trigger to control the speed.

CAUTION! Always ensure the chain brake is engaged when not in use.

Specifications

Engine Displacement: 50cc.
Bar Length: 20 inches.
Weight: Approximately 12 lbs.
Fuel Type: Gasoline.
Oil Type: Bar and chain oil.
Chain Speed: 15 m/s.
Noise Level: 110 dB.

Maintenance

Regular maintenance is crucial for optimal performance:

Clean the air filter regularly.
Sharpen the chain as needed.
Check and replace the spark plug annually.
Inspect the bar and chain for wear.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Fuel issue	Check fuel levels and quality.
Chain not moving	Chain brake engaged	Disengage the chain brake.
Excessive vibration	Worn chain or bar	Inspect and replace if necessary.
Oil leaking	Damaged oil tank	Inspect for damage and replace if needed.

Service: For further assistance, contact customer support.