Poulan Pro 530086595 Chainsaw Manual

The Poulan Pro 530086595 is a powerful chainsaw designed for both professional and home use. It features a robust engine, easy-start technology, and a lightweight design for maximum maneuverability. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key features include a 20-inch bar, automatic oiling system, and an ergonomic handle for comfort during extended use.

Feature	Description
Engine	Powerful 50cc 2-cycle engine
Bar Length	20 inches for cutting larger logs
Weight	Lightweight design for easy handling
Oiling System	Automatic oiling for smooth operation
Safety Features	Chain brake and throttle lock for safety

Safety Information

Always wear appropriate safety gear, including gloves, goggles, and hearing protection. Ensure the area is clear of bystanders before operating the chainsaw.

Read the manual thoroughly before use.
Check for any damage before starting the chainsaw.
Keep hands and feet away from the cutting area.
Do not operate in wet conditions.

WARNING! Failure to follow safety instructions may result in serious injury.

Operation Instructions

To start the chainsaw, ensure the chain brake is engaged, then follow the starting procedure outlined in the manual.

Engage the chain brake.
Set the choke to the closed position.
Pull the starter cord until the engine fires.
Adjust the choke to the open position and pull again to start.

CAUTION! Always ensure the chainsaw is on a stable surface before starting.

Specifications

Engine Type: 50cc 2-cycle
Bar Length: 20 inches
Weight: 12 lbs
Fuel Capacity: 16 oz
Oil Capacity: 8 oz
Chain Speed: 15 m/s
Noise Level: 110 dB

Maintenance

Regular maintenance is crucial for optimal performance. Clean the air filter, check the spark plug, and ensure the chain is properly tensioned.

Inspect the chain for wear and replace if necessary.
Clean the air filter every 10 hours of operation.
Sharpen the chain regularly for efficient cutting.

NOTE: Always refer to the manual for detailed maintenance procedures.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Fuel issue	Check fuel level and quality; ensure choke is set correctly.
Chain not moving	Chain tension	Adjust chain tension; check for obstructions.
Excessive vibration	Worn chain	Inspect and replace chain if necessary.
Engine overheating	Dirty air filter	Clean or replace air filter.

Service: For further assistance, contact customer support.