Poulan Pro 505 Chainsaw Manual

The Poulan Pro 505 is a powerful chainsaw designed for both professional and home use. It features a 20-inch bar, a robust engine, and various safety features to ensure efficient and safe operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. First-Time Setup 4. Specifications 5. Operating Instructions 6. Maintenance 7. Troubleshooting

Features at a Glance

Key components: 20-inch cutting bar, powerful engine, automatic oiling system, and ergonomic handle design.

Feature	Description
20-inch cutting bar	Ideal for cutting large logs and trees
Powerful engine	Provides high performance for demanding tasks
Automatic oiling system	Keeps the chain lubricated for optimal performance
Ergonomic handle	Designed for comfort and reduced fatigue during use
Safety features	Chain brake, throttle lock, and low kickback chain

Safety Information

Always wear appropriate safety gear, including gloves, goggles, and hearing protection. Ensure the area is clear of obstacles before operating the chainsaw.

Read the manual thoroughly before use.
Check the chainsaw for any damage before operation.
Keep hands and feet away from the cutting area.
Never operate the chainsaw while under the influence of drugs or alcohol.

WARNING! Failure to follow safety instructions may result in serious injury or death.

First-Time Setup

Before using the chainsaw for the first time, ensure it is properly assembled and fueled.

Attach the guide bar and chain according to the instructions.
Fill the fuel tank with the recommended fuel mixture.
Check the oil level and fill if necessary.
Perform a safety check before starting the chainsaw.

CAUTION! Ensure all components are securely attached before operation.

Specifications

Engine Type: 2-stroke, air-cooled.
Bar Length: 20 inches.
Fuel Capacity: 16 oz.
Oil Capacity: 6 oz.
Weight: 12 lbs.
Chain Speed: 13.5 m/s.
Noise Level: 110 dB.

Operating Instructions

To operate the chainsaw, follow these steps:

Ensure the chainsaw is on a flat surface.
Press the primer bulb to fuel the carburetor.
Set the choke to the closed position.
Pull the starter cord until the engine starts.
Adjust the choke to the open position once the engine is running.

NOTE: Always maintain a firm grip on the chainsaw while operating.

Maintenance

Regular maintenance is essential for optimal performance and longevity of the chainsaw.

Clean the air filter regularly.
Sharpen the chain as needed.
Check and replace the spark plug annually.
Inspect the guide bar for wear and replace if necessary.

CAUTION! Always disconnect the spark plug before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Fuel issue	Check fuel level and mixture; ensure choke is set correctly.
Chain not moving	Chain tension	Adjust chain tension according to the manual.
Excessive vibration	Worn chain or bar	Inspect and replace chain or bar if necessary.
Engine overheating	Insufficient lubrication	Check oil level and refill if needed.

Service: For further assistance, contact customer support at 1-800-555-0199.