Poulan Pro 2000-01 Chainsaw Manual

The Poulan Pro 2000-01 is a powerful chainsaw designed for both professional and home use. It features a robust engine, easy-start technology, and a lightweight design for enhanced maneuverability. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key features include a 20-inch bar, automatic chain lubrication, and an ergonomic handle for comfort during extended use.

Feature	Description
Engine	Powerful 38cc 2-stroke engine
Bar Length	20 inches for efficient cutting
Weight	Lightweight design for easy handling
Chain Lubrication	Automatic system for optimal performance
Safety Features	Chain brake and throttle lock for safety

Safety Information

Always wear appropriate safety gear, including gloves, goggles, and ear protection. Ensure the work area is clear of obstacles and bystanders.

Read the manual before operation.
Inspect the chainsaw for damage before use.
Keep hands and feet away from the cutting area.
Do not operate in wet conditions.

WARNING! Failure to follow safety instructions may result in serious injury.

Operation Instructions

To start the chainsaw, ensure the chain brake is engaged, pull the choke, and then pull the starter cord. Once started, disengage the chain brake and begin cutting.

Check fuel and oil levels before starting.
Engage the chain brake before starting.
Use a steady motion when cutting.
Always cut at waist height for better control.

CAUTION! Always be aware of your surroundings while operating the chainsaw.

Specifications

Engine Type: 38cc 2-stroke
Bar Length: 20 inches
Weight: 10 lbs
Fuel Capacity: 16 oz
Oil Capacity: 6 oz
Chain Speed: 12 m/s
Noise Level: 110 dB

Maintenance

Regular maintenance is essential for optimal performance. Clean the air filter, check the chain tension, and sharpen the chain regularly.

Inspect and clean the air filter every 10 hours of use.
Check chain tension before each use.
Sharpen the chain as needed.
Store in a dry place when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Fuel issue	Check fuel levels and ensure proper mixture.
Chain not moving	Chain tension	Adjust chain tension as needed.
Excessive vibration	Loose parts	Tighten all screws and bolts.
Oil leaking	Seal damage	Inspect seals and replace if necessary.

Reset: Refer to the manual for reset procedures if applicable.