Poulan Pro 1625 Chainsaw Manual

The Poulan Pro 1625 is a powerful chainsaw designed for homeowners and professionals alike. It features a 16-inch bar and chain, a 25cc engine, and is equipped with an automatic oiling system for smooth operation. Below are key sections for safety, features, maintenance, operation, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Maintenance 4. Specifications 5. Operating Instructions 6. Troubleshooting

Features at a Glance

The Poulan Pro 1625 chainsaw is designed for ease of use and efficiency. Key features include:

16-inch bar and chain for effective cutting.
25cc engine for reliable power.
Automatic oiling system for chain lubrication.
Lightweight design for easy handling.
Easy start system for quick ignition.

Safety Information

Always prioritize safety when operating the chainsaw. Follow these guidelines:

Wear appropriate safety gear including gloves, goggles, and ear protection.
Ensure the area is clear of obstacles before cutting.
Never operate the chainsaw while under the influence of drugs or alcohol.
Keep hands and feet away from the cutting area.

WARNING! Failure to follow safety instructions may result in serious injury.

Maintenance

Regular maintenance is essential for optimal performance:

Check and replace the air filter regularly.
Sharpen the chain as needed for efficient cutting.
Inspect the bar and chain for wear and replace if necessary.
Clean the chainsaw after each use to prevent buildup.

CAUTION! Always disconnect the spark plug before performing maintenance.

Specifications

Engine Displacement: 25cc.
Bar Length: 16 inches.
Weight: Approximately 10 lbs.
Fuel Type: 50:1 gas/oil mix.
Chain Type: Low kickback chain.
Oiling System: Automatic.
Start System: Easy start.

Operating Instructions

To operate the Poulan Pro 1625 chainsaw:

Ensure the chainsaw is properly assembled and fueled.
Start the engine following the easy start procedure.
Hold the chainsaw firmly with both hands.
Begin cutting at a steady pace, allowing the chain to do the work.

Tip: Always cut at waist height for better control.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Fuel issue	Check fuel level and mixture; ensure spark plug is connected.
Chain not moving	Chain tension	Adjust chain tension; check for obstructions.
Excessive vibration	Worn chain	Inspect and replace chain if necessary.
Oil leaking	Oiling system malfunction	Check oil reservoir and lines for blockages.

Service: For further assistance, contact customer support.