Poulan Pro 115259626 Chainsaw Manual

The Poulan Pro 115259626 is a powerful chainsaw designed for both professional and home use. It features a 16-inch bar, a reliable 38cc engine, and is equipped with an automatic oiling system to ensure smooth operation. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key features include: 16-inch cutting bar, 38cc engine, automatic oiling system, and lightweight design for easy handling.

Feature	Description
Engine	38cc 2-cycle engine for efficient cutting
Bar Length	16 inches for versatile cutting
Oiling System	Automatic oiling for continuous lubrication
Weight	Lightweight design for reduced fatigue
Safety Features	Chain brake and low kickback chain for safety

Safety Information

Always wear appropriate safety gear, including gloves, goggles, and hearing protection. Ensure the area is clear of obstacles before operating the chainsaw.

Read the manual thoroughly before use.
Inspect the chainsaw for damage before each use.
Keep hands and feet away from the cutting area.
Never operate the chainsaw while under the influence of drugs or alcohol.

Operation Instructions

To start the chainsaw, follow these steps:

Ensure the chainsaw is on a flat surface.
Engage the chain brake.
Prime the fuel bulb.
Pull the starter cord until the engine starts.
Release the chain brake before cutting.

CAUTION! Always maintain a firm grip and be aware of your surroundings while operating.

Specifications

Engine Type: 38cc 2-cycle
Bar Length: 16 inches
Weight: 10.5 lbs
Fuel Capacity: 12 oz
Oil Capacity: 6.8 oz
Chain Speed: 15.2 m/s
Sound Level: 110 dB(A)

Maintenance

Regular maintenance is crucial for optimal performance. Follow these guidelines:

Clean the air filter regularly.
Check and adjust the chain tension.
Sharpen the chain as needed.
Inspect the spark plug and replace if necessary.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Fuel issue	Check fuel level and quality; ensure proper priming.
Chain not moving	Chain tension	Adjust chain tension; check for obstructions.
Excessive vibration	Loose parts	Tighten all screws and bolts; check chain condition.
Engine overheating	Lack of lubrication	Check oil level; ensure automatic oiling system is functioning.

Service: For further assistance, contact customer support.